Assembly Instruction Sheet

2of2
STEP 4 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Figure 4
STEP 5 Install the Fixture-
A. Carefully tuck all wires into the outlet box and position the Ceiling
Canopy and Fixture Body (B) over the outlet box. Align the holes in
the Ceiling Canopy with the mounting screws, then attach the
Ceiling Canopy and Fixture Body (B) using the previously removed
mounting balls. Hand tighten until snug.
Figure 5
White wire
from outlet box
White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from fixture
Bare, or Green
Ground wire
from outlet box
OR
Ground wire
from fixture
Green Ground Screw
on the Crossbar
STEP 6 Install the Bulb-
A. Insert the bulb (F) onto the socket and screw snugly into place.
Your fixture is now assembled and ready to use. Enjoy!
Socket
Figure 6
NOTE: ALL DIMENSIONS ARE ROUNDED UP
TO THE NEAREST 1/4"
5” Dia.
10” Dia.
4.25”
9.25”
Mounting
Screw
Mounting Ball
A
Ceiling
Canopy
B
F
FINISH: BRUSHED NICKEL
Thank you for purchasing a product.
Need assistance with parts or assembly? Call customer service