Installation Guide

2of2
STEP 4 - Install the Fixture Body
A. Place the ceiling canopy of the Fixture Body (B) onto mounting
screws and secure with previously removed mounting ball. Hand
tighten until snug.
Figure 4
FINISH: BRUSHED NICKEL
NOTE: ALL DIMENSIONS ARE ROUNDED UP
TO THE NEAREST 1/4"
16” Dia.
5.75”
7”
11.75” Dia.
STEP 6 - Install Bulbs
A. Insert vintage bulbs (F) onto sockets and screw snugly into place.
Your fixture is now assembled and ready to use. Enjoy!
STEP 5 - Install Support Rods, Glass Shade and Ring
A. Thread Support Rods (C) onto nipples on the bottom of the Fixture
Body (B). Hand tighten until snug.
B. Remove lock balls from bottom ends of Support Rods (C).
C. Place the Glass Shade (D) over Support Rods (C) and place the
Ring (E) onto the Support Rods (C). Secure them to the Fixture
Body (B) by threading previously lock balls onto Support Rods (C).
Hand tighten until snug.
Mounting Screw
Mounting Ball
A
B
Figure 5
B
C
D
E
Lock Ball
Nipple
Figure 6
F
Socket