Installation Guide

2of2

Figure 4

STEP 4 - Install the Fixture Body

A. Place the ceiling canopy of the Fixture Body (B) onto mounting

screws and secure with previously removed mounting ball. Hand

tighten until snug.

FINISH: POLISHED CHROME

NOTE: ALL DIMENSIONS ARE ROUNDED UP

TO THE NEAREST 1/4"

10” Dia.

4.5”

9.25”

5” Dia.

Mounting Screw

Mounting Ball

Ceiling Canopy

STEP 5 - Install Glass Shade and Rings

Two people are required for this step.

A. Remove lock balls from side arms of the Fixture Body (B).

B. Place the Top Ring (C) onto the top edge of the Shade (D). Place the

bottom edge of the Shade (D) into the Bottom Ring (E).

C. Lift the Shade Assembly up and pass the side arms of the Fixture

Body (B) through the Shade (D). Align the holes on the Bottom Ring

(E) to the side arms of the Fixture Body (B).

D. The another person is to secure the Bottom Ring (E) by threading

the previously removed lock balls and hand tighten until snug.

Lock Ball

Figure 5

STEP 6 - Install Bulb

A. Insert the vintage bulb (F) onto the

socket and screw snugly into place.

Your fixture is now assembled and

ready to use. Enjoy!

Socket

Figure 6