Installation & Assembly

ASSEMBLY INSTRUCTIONS

B → A → C → D → E → F → Bulb

1. Carefully unpack and identify all parts referring to illustration for parts identification.

2. Turn the power to the installation point OFF.

3. Unravel the supply power and ground wires and pass them through the center holes of

center tube (B), (C) and canopy assembly (D).

4. Thread the bottom of center tube (B) into the coupling at the top of socket assembly (A).

Repeat the process for remaining center tube (B), (C) as shown in the diagram, until snug.

5. Install canopy assembly (D) into the top of the center tube (C).

6. Carefully place shade (E) to the socket assembly (A), securing with socket ring (F).

7. Referring to the installation instruction with the product for the wiring and installation.

8. Install proper bulb (not provided) to the sockets referring to the marking and/or labels on the

fixture for maximum wattage.

9. Restore the power to the installation point ON.

10. Assembly is completely. Retain this sheet for future reference.