Specifications
3 Light Bath Vanity
Fixture Finish: Black
Glass/Shade Finish: Black Metal Cage
Materials: Steel
Fixture Width: 21.125” 53.6575cm
Fixture Height: 10.375” 26.3525cm
Fixture Extension 6.25” 15.875cm
Glass Diameter: 4.5” 11.43cm
Glass Height: 5.875” 14.9225cm
Canopy/Backplate: 8.125”W x 4.375”H x 0.75”E 20.64cmW x 11.113cmH x 1.905cmE
Chain: NA NA
Rod: NA NA
Wire: 8” 20.32cm
Bulb Type: Incandescent, Type A
Wattage: 3 x 60W(M)
Voltage: 120
Install Position: Reversible
Approved Location: Damp Location
Sloped Ceiling: Yes
ADA: No
Close-to-ceiling: No
Bulbs Included: No
Dimmable: Yes
• Offered in pewter or matte black
• Protective metal cages shield bulbs
• May be mounted on the wall or ceiling
• Dimensions differ based on conguration
Nautical-inspired, this is a collection of industrial xtures to create
your seaside retreat. Offered in pewter and matte black, the New
England style is enhanced by protective cages that shield the
otherwise exposed bulbs. Created to suit the needs of many, ball
joints permit a multitude of congurations. Point all of the metal
shades down for directional task lighting or angle them out to t a
low ceiling or tight space. This 3-light bath vanity is damp rated and
may be mounted on the wall or ceiling.
Dimensions and specications are approximate and based on the most current information possible at the time of publication. The manufacture reserves the right to make design changes and
modications without prior notice. Our products are UL/CUL approved. Unless otherwise noted as pending, Wattages stated are the maximum recommended; however, lower wattages may be used.
Bulbs are not included unless otherwise noted. Larger xtures may require reinforced outlet boxes and additional support. Receipt or possession of these materials does not constitute an agreement to sell.