Specifications (Matte Black Metal Cage)

Fixture Finish: Matte Black
Glass/Shade Finish: Matte Black Metal Cage
Materials: Steel Steel
Fixture Width: 12” 30.48cm
Fixture Height: 17” 43.18cm
Min - Max Height:
Glass Diameter: 11.5” 29.21cm
Glass Height: 14” 35.56cm
Canopy/Backplate: 4.625”W x 0.875”E(Ceiling pan) 11.7475cm W x 2.2225cm E (Ceiling pan)
Chain: N/A
Rod: 1ea 6”, 3ea 12” 1ea 15.24cm, 3ea 30.48cm
Wire: 10’ 3.048m
Bulb Type: Incandescent, Type B
Wattage: 3 x 60W(C)
Voltage: 120
Install Position:
Approved Location: Dry Location
Sloped Ceiling: Yes
ADA: No
Close-to-ceiling: No
Bulbs Included: No
Dimmable: Yes
Dimensions and specifications are approximate and based on the most current information possible at the time of publication. reserves the right to make design changes and modifications without prior
notice. UL/CUL approved. Unless otherwise noted as pending, Wattages stated are the maximum recommended; however, lower wattages may be used. Bulbs are not included unless otherwise noted.
Larger fixtures may require reinforced outlet boxes and additional support. Receipt or possession of these materials does not constitute an agreement to sell.
3 - Light Unique / Statement Geometric Pendant
Nautical-inspired, collection of industrial fixtures to create your seaside retreat. Offered
in pewter and matte black, the New England style is enhanced by protective cages
that shield the otherwise exposed bulbs. Created to suit the needs of many, swivel
canopies allow the fixtures to be mounted on sloped ceilings. Ball joints permit a
multitude of configurations. Point all of the metal shades down for directional task
lighting or angle them out to fit a low ceiling or tight space. This 3-light pendant is
comfortably sized for an intimate dining room or entry.
• Swivel on canopy allows the xture to be mounted on a sloped ceiling
• Protective metal cages shield bulbs
• Offered in pewter or matte black