ASSEMBLY INSTRUCTION 24” SWIVEL COUNTER HEIGHT CHAIR WITH SQUARE SEAT IO Backrest = Cushion Seat = Stretcher BI Stretcher a Apron with {Front & Back) {Left & Right) Swivel Plate big big small small 1PC 1PC PCS PCS 1PC a Chair Leg = Chair Leg (Hole) I CBS Screw 1] CBC Screw CBC Screw (No Hole) M4 x 38mm M6 x 256mm M6 x 40mm No Hole Hole: PCS PCS 8 PCS PCS 10 PCS I CBC Screw Flat Washer [M| Spring Washer oI Allen Key M6 x 70mm M6.5 x 16.
Attached the 2 Pcs Chair Leg (Hole) (G) oppositely to the Apron with Swivel Plate (E), Use CBC Screw (J), Spring Washer (M), Flat Washer (L) with Allen Key (N). Do not fully tighten the screws at this step. Fully tighten the screws after step 3 and 4. While assemble, must facing toward arrow. Hole FACING FRONT TOWARD ARROW Take the Allen Key, and tum the screw until the legs are secure. DO NOT TIGHTEN COMPLETELY. Stop when you feel you are adding force to tighten the screw.
Then attach the Stretcher (Front & Back) (C) to the big hole on the Chair Leg (F) & (G) with CBS Screw (H). At Step 3 and 4, align mounting position of the stretcher the Chair Leg (F) & (G). At this moment, DO NOT use the CBS Screw (H) to tighten first. You only can FULLY TIGHTEN AFTER YOU HAVE FULLY TIGHTEN THE SCREWS AT STEP 1 AND 2.
Invert Cushion Seat (B) and place on a stable raised surface (i.e. Table). Attached the Backrest (A) to the Cushion Seat (B) using CBC Screw (K), Spring Washer (M), Flat Washer (L) with Allen Key (N). Then, affix the center CBC Screw (J), Spring Washer (M), Flat Washer (L) with Allen Key (N). Keep the Backrest (A) and Cushion Seat (B) inverted on a stable raised surface.
