Owner Manual

8
8. Ceiling Fan Wiring
WARNING: Failure to disconnect power supply
prior to the installation may result in serious injury and
fire hazard
Important: Be sure outlet box is properly grounded
or that
a ground wire (GREEN or bare) is present.
Make sure all electrical connections comply with
Local
Codes or Ordinances and the National Electrical
Code. If you are unfamiliar with electrical wiring, or if
the house/building wires are different colors than
those referred to in the instructions, please use a
qualified electrician.
When down rod is secured in place on the hanging
bracket, electrical wiring can be made.
Wiring Instructions (Diagram 1)
Using wire nut provided, connect BLACK and BLUE
wires from fan to BLACK wire from ceiling.
The wires should be spread apart with the grounded
conductor and the equipment grounding conductor on
one side of the outlet box and the ungrounded conductor on the other side of the outlet box.
Using wire nut provided, connect WHITE wire from fan to WHITE wire from ceiling. Connect the installing ground
wire (Green or bare)
to the ground wire located on the down rod end.
The splices, after being carefully made, should be turned
upward and pushed carefully up into the outlet box.
Note: Wrap each wire nut separately with electrical tape as an
extra safety measure.
Important:
Make sure all electrical connections comply with Local Codes or Ordinances and the National Electrical Code. If
you are unfamiliar with electrical wiring, or if the house/building wires are different colors than those referred to
in the instructions, please use a qualified electrician.