Owner Manual

9. Canopy Assembly

1. Loosen the four (4) screws/washers on the side of the

hanging bracket

2. Lift canopy to the hanging bracket, and secure the

canopy with the four (4) screws/washers. Securely tighten

screws

10. Blade Assembly

1. Locate twelve (12) screws/washers in the hardware

pack

2. Hold blade arm up to blade and align the three (3)

holes

3. Insert three (3) screws/washers with fingers, and

tighten with a phillips screwdriver

4. Repeat Step 3 for the remaining blades

Attaching Blades to Motor Housing

5. Remove blade arm screws and lock washers from the

motor housing and set aside

6. Remove motor shipping pads, discard pads and save

the screws

7. Align the blade arm holes with the motor housing holes

and attach the two (2) screws/washers. Fasten

securely

8. Repeat Step 7 for the remaining blade arms