ASSEMBLY INSTRUCTION SPINDLE BACK SIDE CHAIR: Chair Back Organelle [#1 Wooden Seat Foreleg LAR apes. Jove Bolt M8 x 70mm Jove Bolt M6 x 50mm [8] eho Bolt Mex 40mm ER] Lock Washer M6 pes Apes Apes pests. B Flat Washer M6 x 18mm Cs-Ch Screw Allan Key M4 x 60mm 20mm — pics Gps Api This page lists all the contents included in the box. Please take the time to identify the hardware as wallies the individual components to this product.
| Put the Chair Back (A) Box Frame (B) upside down on the soft and smooth surface. With assistance attach Box Frame (8) onto Chair Back (A). Then insert Hebe Bolt (E), Lock Washer (H) and Flat Washer (1) into prevailed holes of each comer, by using Allen Key (K}. Insert Hebe Bolt Washer (H) and Flat Washer (1) into the prevailed holes of the middle of Chair Back using Allen Key (K). Do not fully tighten the bolts in this step. Take the Allen Wrench, and turn the bolts until the legs are secure.
Attach Wooden Seat (C) and Box Frame (B) with Cs-Cb Screw (J) by using Screwdriver {not included). Tighten all wood screws in this step. Stand chair up on an even surface and check that it is balanced. If there is a slight wobble, apply downward pressure in the comer where a leg is uneven. Keeping pressure in that corner, tighten all bolts. If balanced, apply downward pressure evenly in the center and tighten all bolts. Do not aver-tighten beyond hole depth.