ASSEMBLY INSTRUCTION SPINDLE BACK 29"H BAR HEIGHT CHAIR Chair Back Nelson Frame Weyden Seat Front Leg (Lat-Right} <> a Ine ” pe 1pc Arcs IH sie stretcher ong) Front Stretcher (Short) Jove Bok Be coc Ban {Left-Right) » KG 70mm M6 x 40mm PCs 1po pes poss icc Washer Be Washer | Catch Screw Mean Head Trow pag Ten = “= Re (rows pests: 10p8s Basics Apes Mien tey Woe B44 x 80mm 1pt Tpe This page sts all the contests Incidence the box, Please take the time 16 identify the hardware as well as the Individual componen
Put the Chair Back (A), Box Frame (B) upside down on the soft and smooth surface. With assistance attach | Box Frame (B) onto Chair Back (A). Then insert Jibe Bolt (G), Lock Washer (1) and Flat Washer (J) into prevailed holes of each comer by using Allen Key (M). Insert Job Bolt (H), Lock Washer (I) and Flat Washer (J) into the per-drilled holes of the middies of Chair Back (A) by using Allen Key (M). Do not fully tighten the bolts in this step.
Attach Front Leg (D) assembly to corner of Box Frame (B) along inserting the Front Stretcher (F) onto each hole on Front Leg (D) with applying some Glue (N), then insert Jibe Bolt (G), Lock Washer (I) and Flat Washer (J) using Allen Key (M). Insert Pan Head Screw (L) into the holes of Front Leg (D) and Stretcher (F) by using screwdriver (not included).
Attach Wooden Seat (C) and Box Frame (B) with Cs-Cb Screw (K) by using screwdriver (not included). Tighten all screws in this step. Turn the assembled chair ta the upright position carefully. Make sure the chair is level,and then securely tighten all bolts at this stage. Assembly is now completed. Stand chair up on an even surface and check that it is balanced. If there is a slight wobble, apply downward pressure in the corner where a leg is uneven.