Installation & Assembly

ASSEMBLY INSTRUCTION
CAUTION：
1. Do Not Use Power Tools!
2. Please read these instructions carefully before assembly. Count and organize all parts before
you begin.
3. Assemble product on clean soft surface, such as a piece of carpet, so as not to scratch the
finish of the product.
ASSEMBLY:
1. Attach the legs to the table top using M8 headless screws, flat washer M8, spring washer M8
and nut M8. Do not tighten completely at this stage.
2. First attach the Connecting to the table leg using M8 headless screws, flat washer M8, spring
washer M8 and nut M8. Do not tighten completely at this stage.
3. Put the assembled table on the flat surface and tighten all the screws.
4. Fix the adjustable feet pads under legs to ensure the table is level.
5. Put the bolt cap onto the nuts.
PARTS&HARDWARE LIST
PART
DESCRIPTION
QTY
A
Table Top
1
B
Leg
4
C
Connecting Ring
4
E
Headless screws M8
4
F
Flat Washer M8
12
G
Spring Washer M8
12
H
Nut M8
12
I
Bolt Cap
12
PLEASE DO NOT OVERTIGHTEN
(Aluminum is soft metal over tightening may strip thread or break parts)