Installation & Assembly

Assembly Instructions

CAUTION

1. Please read instructions carefully and thoroughly before assembling. Check parts against the parts list to

make sure you have all the parts needed for proper assembly.

2. Familiarize yourself with the inventory of parts and the accompanying illustrations to ensure safe and proper

assembly.

Assembly：

1. Remove all protective material carefully. Avoid cutting the surface of the furniture while removing the packaging

material.

2. Carefully turn the table top upside down on a non-abrasive flat surface. Then turn the base on the table top to

make the holes of the top and base in one line. Screw bolts into the Table table top and base by using flat

washers and lock washers and nuts .

3. Carefully turn the table to the upright position and adjust the feet on the bottom of the legs to level the table

Part

Picture

Description

Qty

Part

Picture

Description

Qty

Table top

Nut

Base

Flat Washer

Bolt

Lock Washer

PAGE 1
Assembly Instructions CAUTION 1. 2. Please read instructions carefully and thoroughly before assembling. Check parts against the parts list to make sure you have all the parts needed for proper assembly. Familiarize yourself with the inventory of parts and the accompanying illustrations to ensure safe and proper assembly. Assembly： 1. Remove all protective material carefully. Avoid cutting the surface of the furniture while removing the packaging material. 2.
PAGE 2
Instruction of the table: 1. Open the door with the attached handle carefully and pull down the support bar for the propane tank. 2. Insert the propane tank laying on its side as seen in the photo then raise the support bar back into an upward position. 3. Attach the end of the hose that goes to the propane tank then attach the other end that goes to the burner. 4. First turn on the propane tank and then light the burner and its ready to use.