Installation & Assembly

Instruction of the table:
1. Open the door with the attached handle carefully
and pull down the support bar for the propane tank.
2. Insert the propane tank laying on its side as seen
in the photo then raise the support bar back into an
upward position.
3. Attach the end of the hose that goes to the propane
tank then attach the other end that goes to the burner.
4. First turn on the propane tank and then light the burner
and its ready to use.
IMPORTANT!
DO NOT MAKE THE FIRE GLASS OR FIRE STONE COVER THE PART SHOWN IN THE FOLLOWING PICUURE, OTHERWISE
THE FIFE WILL GO OUT!