Assembly Instructions

11
A
B
D
Middle Faceplate
1
1
8
8
8
1
C
Right Shelf
2
E
2
F
1
G
1
2
（M8*40）
（M8）
（M8）
22
（M6）
（M6*30）
Short Screw
Bolts
Big Lock Washer
Big Flat Washer
Small Flat Washer
12
（M6*35）
Long Screw
10
Big Nut
（M8）
8
Small Nut
（M6）
22
（M8）
Nut Cap
8
Parts
Pictures
Description
Q'ty
Right Middle Legs
Right Side Legs
Table Top
1. Turn the table top(A) upside down on the soft clean surface. Loosely attach 8 bolts(K) to the table
top. Tighten the bolts at this time.
2. Loosely attach the 2 side legs(G&H) and 2 middle legs(I&J) to the table top(A) with big flat washers(L),big
lock washers(M) and big nuts(N). DO NOT tighten the nuts.
3. Loosely attach the side faceplate(C) and middle faceplate(B) to the legs with short screws(P),small flat
washers(R), small lock washers(S) and small nuts(T). DO NOT tighten the nuts. Leave enough play for
assembly those table faceplates.
4. Turn the party bar upon the floor. Attach right shelves(D), middle shelves(E)and left shelves(F) to the
side faceplate(C) and middle faceplate(B) with long screws(Q), small flat washers(R),small lock washers
(S) and small nuts(T).
5. Tighten all the bolts and nuts completely, then cover the bolts (K) with nut cap(O) and cover the screws
(P&Q) with nut cap (U).DO NOT over-tighten.
6. Use the adjuster feet to level the party bar.
Side Faceplate
Left Shelf
Middle Shelf
22
（M6）
Small Lock Washer
（M6）
Nut Cap
22
1. Please read these instructions carefully before assembly.
2. Aluminum is soft metal over tighten may strip thread or break the part.
3. DO NOT use power tools.
1
Left Side Legs
1
Left Middle Legs
ASSEMBLY INSTRUCTIONS
ATTENTION:
Assembly step:
Warning : please do not use acid or alkaline washing liquid to clean the product.
44
22
33
H
I
J
K
L
P
R
M
N
O
Q
S
T
U
A
K
G
J
H
I
L
M
N
O
B
C
P
R
S
T
U
DEF
Q
R
S
T
U