Owner Manual

SAVE THESE INSTRUCTIONS
Bulb Replacement
1. Unplug light string from power source.
2. Gently pull the bulb straight out of the socket (Figure 1).
3. Carefully insert new bulb into socket – bulb is keyed and
only goes in one way (Figure 2).
Fuse Replacement
1. Unplug light string from power source.
2. Fuses are located in light string plug. Slide the fuse
access cover away from cord side (in direction of arrow,
Figure 3) exposing fuses.
3. Remove fuses from compartment and examine.
Replace burnt out fuse with new one.
4. Close fuse compartment by sliding access cover back
in towards cord side of plug (Figure 4).
Fig. 3 Fig. 4
Fig. 1 Fig. 2