Back Panel Left Side Panel Back Center Rail Back Rail Center Panel Front Rail Right Side Panel Bottom Panel Leg Top Panel Box Front Panel Right Side Panel of Left Box Left Side Panel of Left Box Right Side Panel of Right Box Left Side Panel of Right Box Box Back Panel Bag 3
Cam Lock Ø15*12mm Cam Bolt Ø6*42mm Long Bolt Ø6*50mm Barrel Nut Ø6*12mm Handle L85*W30*H27 Long Wood Dowel Ø8*40mm Round head bolt Ø5/32"*12mm Short Wood Dowel Ø8*30mm Short Bolt Ø6*28mm Long Screw Ø3.5*25mm Allen Key 4mm Safety strap kit Note: It is not recommended to use power tools during assembly. You may use power tools to assist in mounting the safety strap kit to the wall.
Attach Cam Bolt (B) to Side Panels (4 & 7) and Top Panel (10) as shown. B B B B B Attach Back Rail (3) to Right Side Panels (7) using Wood Dowel (C) and Cam lock (A) . See image inserts to the right for proper cam lock installation .
Attach Back Center Rail (2) to Back Rail (3) using Wood Dowel (C) and attach Back Panel (1) to place . Attach Back Rail (3) to place using Wood Dowel (C) and Cam lock (A) . 7 3 Attach Front Rail (6) to place using Wood Dowel (C) and Cam lock (A) . Attach Left Side Panel (4) to place using Wood Dowel (C) and Cam lock (A) .
Attach Center Panel (5) to Bottom Panel (8) using Wood Dowel (C) ,Long Bolt (D) and Barrel Nut (E) and Allen Key (K) . Attach Center Panel (5) and Bottom Panel (8) to place using Wood Dowel (C) ,Long Bolt (D) and Barrel Nut (E) and Allen Key (K) .
Attach Legs (9) into place using Wood Dowel (C) ,Short Bolt (F) and Allen Key (K) . Attach Top Panel (10) into place using Wood Dowel (C) and Cam lock (A) .
Set Box Front Panel (11), Right Side Panel of Left Box (12) and Box Back Panel (16) into place using Long Screw (I) . Attach Left Side Panel of Left Box(13) into place using Long Screw (I) . Attach Handle (G) to Box Front Panel (11) using Round Head Bolt (H) . Place Bag (17) into box and secure by inserting rods into predrilled holes. 16 Set Box Front Panel (11),Right Side Panel of Right Box (14) and Box Back Panel (16) into place using Long Screw (I) .
Attach box Left Box and Right Box into place as shown . Right Box 13 Left Box Attach Long Wood Dowel (J) through the box hole into the cabinet to help hold the box in place.
Insert Short Screw (Part # c) through Washer (Part # b) and Safety Wall Strap (Part # e) and screw it into pre-drilled hole of Top Panel (Part # 10). Drill a 11/32" hole where you want to secure your pantry .The hole should be at the same height as the hole in the Top Panel (Part # 10). Tap Wall Anchor (Part # a) into the hole . Insert Long Screw (Part # d) through a Washer (Part # b) and Wall Safety Strap (Part # e) into Wall Anchor (Part # a).
