Assembly Instructions

ManualsBrandsThree Posts ManualsCloset Storage & OrganizationPatricia 25" W Closet System Walk-In Tower

Part List

Closet Wall Drawer Unit

IMPORTANT

Back Panel

1 pc.

Top

1 pc.

Front Rail

1 pc.

Shelf

3 pcs.

Side Panel

1 pc.

Side Panel

1 pc.

Carefully remove all the parts from the carton and

place them individually on a soft cloth to prevent

scratches or other damage.

Carefully and strictly follow these assembly instructions

to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

For assembly see instructions in carton.

Summary of content (4 pages)

PAGE 1
Closet Wall Drawer Unit IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Top 1 pc. C. Shelf 3 pcs. B. Front Rail 1 pc. D. Side Panel 1 pc. E. Side Panel 1 pc. F. Back Panel 1 pc. For assembly see instructions in carton.
PAGE 2
Closet Wall Drawer Unit IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List H. Front Rail 1 pc. G. Top 1 pc. I. Plinth 1 pc. M. Bottom 1 pc. L. Back Panel 1 pc. K. Side Panel 1 pc. J. Side Panel 1 pc. Hardware List Leveler 4 pcs. Plug 4 pcs.
PAGE 3
Assembly Instructions 6/8 IMPORTANT To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly. STEP 9 Anchor in wall Drill a 3/8” hole in wall in-line with the pre-drilled hole at top of unit. Bracket on wall Pre-drilled hole at top of unit Wall Screw 3/8” wall hole Wood Screw Move unit. Insert Anchor into the wall hole and attach Bracket with Wall Screw.
PAGE 4
Assembly Instructions 8/8 Drawer (O) O4 O2 O3 STEP 1 Attach O2 to O3 and O4, then flip the locks. (See Figure A) O5 O2 Figure 2 STEP 2 O1 Slide O5 into the grooves in O3 and O4. Be sure to push O5 all the way forward so it meets O2. STEP 4 STEP 3 Attach O1 to unit, then flip the locks. Attach Knob with machine screw. Part List O1. Drawer Front 3 pcs. O2. Drawer Back 3 pcs. O3. Drawer Side 3 pcs. O4. Drawer Side 3 pcs. O5. Drawer Bottom 3 pcs.