Owner Manual

Installation

Step 1

Unpack all parts from cartons carefully.

Separate the Mounting Plate(B) from the Canopy of

the lamp body(E) by removing 2 Canopy Screws(D).

Step 2

Attach the Mounting Plate(B) to the junction box and

fix it by turning 2 Mounting Screw(C) clockwise.

Step 3 Wire connection

*Parallel Cord(round&smooth) *Parallel Cord(square&ridged)

Clear,Brown,Gold or Black without Tracer(colored stripes)

Clear,Brwn,Gold or Black without Tracer(colored stripes)

Connect,Hot,Black or Red outlet Supply Wire to: Connect,Neutral,White Outlet Supply Wire to:

Black White

*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and

ridged and the hot wire will be round in shape and smooth.(See illustration on left)

Clear,Brown,Gold or Black without Tracer(colored stripes) Clear,Brwn,Gold or Black without Tracer(colored stripes)

Insulated Wire(not green)with copper metal conductor Insulated Wire(not green)with Silver metal conductor

Step 4

Attach the Canopy of the lamp body(E) onto the Mounting

Plate(B) and fix it with 2 Canopy Screws(D) clockwise.

Place the Shade(F) over the socket and fix it by turning

the Socket Ring(G) clockwise till tight.

Insert the bulb (H) into the Socket. Be sure to use

the bulb with wattage not exceed than specified

on the fixture.

Adjust the arm of the Lamp Body(E) to your desired angle.

Step 5

PLEASUE USE TYPE"B" BULB MAX 40-WATT OR CFL

BULB MAX 13-WATT OR LED MAX 9-WATT

THERE IS 1 X 4W LED BULB IN THE BOX.

Step 5

Consult a qualified electrician to ensure correct branch

circuit conductor

ENJOY YOUR LAMP