Assembly Instruction

2of2
Figure 3
STEP 3 - Making the Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into outlet box.
Note: If the electrical wire is going to be cut shorter than provided
you will need to identify the "L" line wire and the "N" neutral wire
before you cut the excess wire off. One is labeled N and the other
labeled L. To do this separate the "L" line wire and the "N" neutral
wire as far as you need to. Re-label the wire near where you want to
make the cut. Be sure to mark the wire on the side of the fixture and
not on the excess wire being cut and removed.
Ribbed side of wire from fixture
identified with the Label “N”
Smooth side of wire from fixture
identified with the label “L”
White wire
from outlet box
Black wire from
outlet box (or Red)
Bare, or Green
Ground wire
from outlet box
Ground wire
from fixture
Bare, or Green
Ground wire
from outlet box
OR
Ground wire
from fixture
Green Ground Screw
on the Crossbar
STEP 4 Install Ceiling Canopy
to Crossbar Assembly
-
A. Attach the Ceiling Canopy (DD)
over the end of the nipple and
secure with the knob. Hand
tighten until snug.
Figure 4
DD
STEP 6 Install Bulbs-
A. Insert bulbs (E) onto sockets and screw snugly into place.
Your fixture is now assembled and ready to use. Enjoy!
Socket
Figure 6
E
Nipple
Knob
Lock Ball
Figure 5
STEP 5 - Install the Shade
Two people are required for this
step.
A. Remove lock balls from bottom
of the Fixture Body (A).
B. Place the Ring (B) onto the top
edge of the Shade (C). Place
bottom edge of the Shade (C)
into the Shade Holder (D).
C. Lift the shade assembly up and
pass the arms of the Fixture
Body (A) through the Shade (C).
Position the holes on the Shade
Holder (D) to the arms on the
Fixture Body (A). The second
person is to secure the Shade
Holder (D) by threading the lock
balls onto the ends of the arms
of the Fixture Body (A). Hand
tighten until snug.
A
D
C
B
FINISH: BRUSHED NICKEL
38”
10” Dia.
74” OVERALL
HEIGHT INCLUDES
48” CHAINS AND
2 QUICK LINKS
(
)
8”
4.5”
NOTE: ALL DIMENSIONS ARE ROUNDED UP
TO THE NEAREST 1/4"
4.25”
21.75”
Thank you for purchasing.
Need assistance with parts or assembly? Call our customer service or visit our website.