Congratulations! You have purchased a stylish piece of us. We strives to provide fine furniture products, built with quality materials and hand finished details. Please carefully follow the assembly instructions to ensure your furniture is assembled correctly to provide long lasting enjoyment. Should you experience any missing or damaged parts, do not return to the store. Please visit our website or contact us directly. Care: Use a soft clean cloth that will not scratch the surface when dusting.
HARDWARE LIST Tools needed: Allen key (part Phillips Head Screw Driver (Not included) 30f13 HRS SF 0 (®yp CAM LOCK CAM BOLT WOOD DOWEL SCREW HEX SOCKET HEAD BOLT 20 PCS 20 PCS 42 PCS PCS 8 PCS BARREL NUT SHELF HOLDER KNOB ROUND HEAD BOLT DOOR CATCH 8 PCS 20 PCS 4 PCS 4 PCS PCS MAGNET ROUND HEAD ALLEN KEY SCREW 1PC 6 PCS 1PC
Step 1. Insert Cam Bolts (part #2) into per-drilled holes of parts A,B,E,F,K& L using a Phillips head screw driver. Step 2.
Step 3. Turn assemble parts A,B & C upright with notched cutouts facing upward. Attach Rail D using Wood Screws (part #4) & Wood dowels as shown. Step. Tum unit over with Rail D flat on floor as shown. Attach Panel E to Rail D using Cam locks & Wood dowels as shown.
Step 5. Attach Rail G to the unit using Cam locks & Wood dowels as shown. Step 6. Place Rails J into place on Rail G using Wood dowels as shown. Slide Back panels H & Panel | into the grooves as shown. Insert Wood dowels into the top end of Parts J. Attach rail G to Panel E & Rails J using Wood dowels & Cam locks as shown.
Step 7. Attach Rail U to Top L using Wood Dowels & Screws as shown. Step 8. Attach Side Panel F using Wood dowels & Cam locks as shown. Attach Magnet (part #11) to Shelf C using Round Head screws (Part #12) as shown. Attach Door Catch Magnet (Part #10) to Rail D using Round Head Screws (Part #12) as shown.
Step 9. With bottom side facing up, attach Base K to cabinet using Wood Dowels,Cam Lock, Hex Socket Head Bolt (Part #5) & Barrel Nuts (Part #6) as shown. Attach legs using Hex Socket Head Bolts & Wood dowels (as shown in instruction manual included in carton with legs). IMPORTANT! DO NOT ATTACH THE CENTER SUPPORT LEG AT THIS TIME. Carefully turn cabinet over so that Base K is now on the bottom.
Step 10. Attach Top L to cabinet using Wood Dowels & Cam Locks as shown.
Step 11. Attach hardware knobs (Part #8) to Doors M,N,O&P using Round Head Bolts (Part #9) and a Phillips Head screw driver. Attach doors to cabinet by placing bottom Pin Hinge into per-drilled holes at the bottom & depressing top spring loaded Pin Hinge to fit door into place. Note: Be sure Pin Hinges (top & bottom) have fully extended into the per-drilled holes to secure doors into place.
Step 13. Place your assembled cabinet into the desired spot in your home. Attach the Center Support Leg S or T now by turning clockwise into the per-drilled hole. Support Leg T is for use only with Bun Foot. All other Leg styles will use support leg 5. NOTE: The adjustable leveler on the bottom of the Center Support Leg S/T should not be extended until after installation. Adjust the leveler on the bottom of the Center Support leg S/T until it fits tightly against the floor.
Limited Manufacturers Warranty Our products are warranted against defects in material and workmanship for a period of 90 days beginning from the date of sale. Should any parts be missing or defective, we will replace or repair the parts for a period of 90 days from the date of purchase. Should you experience any missing or damaged parts, do not return to the store. Please visit our website, or contact us.
