Care: Use a soft clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polishes, test in an inconspicuous area first. Use of solvents of any kind may damage your furniture’s finish. To clean, simply use a soft clean cloth moistened with lukewarm water, then buff with a dry soft clean cloth.
PART LIST A B 1 PC F 1 PC K 2 PCS L 1 PC P 1 PC 2 PCS 4 PCS 1 PC N 1 PC R 4 PCS 1 PC J M Q 1 PC 1 PC E H G 1 PC D C 1 PC 2 of 12 2 PCS O 1 PC 1 PC
HARDWARE LIST 1 2 CAM BOLT CAM LOCK 20 PCS 6 3 8 PCS 8 1 PC 6 PCS SCREW HEX SOCKET HEAD BOLT 3 PCS 8 PCS 4 PCS ALLEN KEY 1 PC Tools needed: Allen key (part #13)(included) Phillips Head Screw Driver (Not included) 3 of 12 10 ROUND HEAD BOLT 13 ROUND HEAD SCREW 5 9 KNOB 20 PCS 12 MAGNET 32 PCS SHELF HOLDER BARREL NUT 11 WOOD DOWEL 20 PCS 7 4 4 PCS DOOR CATCH 2 PCS
Step 1. Insert Cam Bolts (part #2) into pre-drilled holes of parts A,B,E,F,K & L using a Phillips head screw driver. L x20 Step 2. Attach panels A & B to shelf C using Cam locks & wood dowels as shown.
Step 3. Turn assemble parts A,B & C upright with notched cutouts facing upward. Attach Rail D using Wood Screws (part #4) & Wood dowels as shown. 4 3 D 4 3 x2 x2 Step 4. Turn unit over with Rail D flat on floor as shown. Attach Panel E to Rail D using Cam locks & Wood dowels as shown.
Step 5. Attach Rail G to the unit using Cam locks & Wood dowels as shown. C A x1 x1 Step 6. Place Rails J into place on Rail G using Wood dowels as shown. Slide Back panels H & Panel I into the grooves as shown. Insert Wood dowels into the top end of Parts J. Attach rail G to Panel E & Rails J using Wood dowels & Cam locks as shown.
Step 7. Attach Side Panel F using Wood dowels & Cam locks as shown. Attach Magnet (part #11) to Shelf C using Round Head screws (Part #12) as shown. Attach Door Catch Magnet (Part #10) to Rail D using Round Head Screws (Part #12) as shown.
Step 8. With bottom side facing up, attach Base K to cabinet using Wood Dowels,Cam Lock, Hex Socket Head Bolt (Part #5) & Barrel Nuts (Part #6) as shown. Attach legs using Hex Socket Head Bolts & Wood dowels (as shown in instruction manual included in carton with legs). Carefully turn cabinet over so that Base K is now on the bottom.
Step 9. Attach Top L to cabinet using Wood Dowels & Cam Locks as shown.
Step 11. Insert the Shelf Holders (Part #7) into desired position and add shelves.
Limited Manufacturers Warranty Our Products are warranted against defects in material and workmanship for a period of 90 days beginning from the date of sale. Should any parts be missing or defective, we will replace or repair the parts for a period of 90 days from the date of purchase. Should you experience any missing or damaged parts, do not return to the store. Please contact us. This warranty gives the purchaser specified legal rights in addition to any rights which may vary from state to state.
