Congratulations! You have purchased a stylish piece of us, We strives fo provide ding furniture products, bull with quality materials and hand finished detail. Please carefully follow the assembly instructions to nature your infinitive is Assembled correctly to provide long lasting enjoyment. Should you experience any missing mortgaged parts, donor return tithe store, Carer Use a soft clean cloth that will not scratch the surface when dusting. Use of furniture polish is net necessary.
PART LIST F Front Top Rail Fixed Shelf 1 1pc 1pc Right Side Panel : Bottom Panel 4 1pc 1pc 1pc
Step 1. Attach Drawer Stopper (Q) and Magnet (L} to Nether Rail (17) using Short Screw (R) and Screw (G) . Attach Drawer Stopper (Q) to Upper Rail (3) using Short Screw R) . Attach Knob (M) to Door (16) using Round Head Bolt (N) . ~ Nx1 Rx2 Se Qx2 Step 2. Set Drawer Front Panel (13), Drawer Side Panels (11) , Drawer Bottom Panel (12) and Drawer Back Panel (14) into place using Long Screw () . Attach Handle(J) to Drawer Front Panel (13) using Short Round head bolt (K). Repeat for second drawer .
Step 3. Attach Cam Bolt (B) to Side Panels (4 & 5) and Top Panel (8) as shown. Ty Bx 18 Step 4. Attach Front Top Rail (1), Fixed Shelf (2) ,Upper Rail (3), Nether Rail (17) and Back Rail (15) to Right Side Panel (4) using Wood Dowel (C) and Cam lock (A) . Set Left Side Panel (5) into place using Wood Dowel (C) and Cam lock (A) . See image inserts fo the right for proper cam lock installation .
Step 5. set Bottom Panel (6) into place using Long Bolt (E) , Barrel Nut (D), Wood Dowel (C) and Allen Key (P).
Step 7. set Top Panel (8) into place using Wood Dowel (C) and Cam lock (A) .
Step 9. Attach Shelf Support (H) into the hole Insert Adjustable shelf (10) to place . Hx 8 Step 10. Insert drawers into cabinet .
Step 11. Set Door (16) into place . Step 12. Insert Short Screw (Part # ยข) through Washer (Part # b) and Safety Wall Strap (Part #e)and screw it into per-drilled hole of Top Panel (Part #8). Drill a 11/32" hole where you want to secure your pantry .The hole should be at the same height as the hole in the Top Panel (Part # 8). Tap Wall Anchor (Part # a) into the hole . Insert Long Screw (Part #d) through a Washer (Part # b) and Wall Safety Strap (Part # e} into Wall Anchor (Part #a).
