Owner Manual

Step Step 13
Page 18
O2
1
3
2
4
å
Pull the DRAWER FRONT BRACKETS (8G) apart and slide them
into the grooves in the DRAWER SIDES (D245 and D271). You may
need to gently tap them in with a hammer.
å
NOTE: The DRAWER FRONT BRACKETS are marked "RH" and
"LH" for easy identifi cation.
å
Fasten the DRAWER FRONT (O2) to the DRAWER FRONT
BRACKETS (8G). Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
å
Slide the DRAWER BOTTOM (D979 ) into the grooves
in the DRAWER SIDES (D245 and D271) and
DRAWER FRONT (O2).
å
Fasten the DRAWER BRACE (M64) to the DRAWER
FRONT (O2). Tighten one HIDDEN CAM.
å
Fasten the DRAWER BACK (D60) to the DRAWER
SIDES (D245 and D271) and DRAWER BRACE (M64).
Use fi ve BLACK 1-9/16" FLAT HEAD SCREWS (30S).
å
Re
p
eat this step.
BLACK 9/16" LARGE HEAD SCREW
(8 used in this step)
1S
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
D245
D271
D60
D979
Groove
O2
D245
D271
O2
D245
D271
Surface with
HIDDEN CAM
M64
M64
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(10 used in this step)
30S
8G
Push down
1
2
Unfi nished surface
Hidden part using
recycled material.
Color may vary.