Owner Manual

Step 14
Page 19
I2
1
3
2
4
å
Pull the LARGE DRAWER FRONT BRACKETS (9G) apart and slide
them into the grooves in the LARGE DRAWER SIDES (D257 and
D262). You may need to gently tap them in with a hammer.
å
NOTE: The DRAWER FRONT BRACKETS are marked "RH" and
"LH" for easy identifi cation.
å
Fasten the DRAWER FRONT (I2) to the LARGE DRAWER FRONT
BRACKETS (9G). Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
å
Slide the DRAWER BOTTOM (D979 ) into the grooves
in the LARGE DRAWER SIDES (D257 and D262) and
DRAWER FRONT (I2).
å
Fasten the DRAWER BRACE (M64) to the DRAWER
FRONT (I2). Tighten one HIDDEN CAM.
å
Fasten the DRAWER BACK (D171) to the LARGE DRAWER
SIDES (D257 and D262) and DRAWER BRACE (M64).
Use fi ve BLACK 1-9/16" FLAT HEAD SCREWS (30S).
å
Repeat this step for the remaini
ng large drawers.
BLACK 9/16" LARGE HEAD SCREW
(16 used in this step)
1S
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
D262
D257
D979
Groove
I2
D262
D257
D171
I2
D262
D257
Surface with
HIDDEN CAM
M64
M64
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(20 used in this step)
30S
9G
1
2
Unfi nished surface
Hidden part using
recycled material.
Color may vary.
Push down