Owner Manual

Page 20
Step 15
å
Fasten a DRAWER RIGHT (35AC) to the RIGHT DRAWER SIDE (D245) and a DRAWER LEFT (35AD) to the LEFT
DRAWER SIDE (D271). Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #2.
å
Fasten a DRAWER RIGHT (35AC) to the LARGE RIGHT DRAWER SIDE (D262) and a DRAWER LEFT (35AD) to the
LARGE LEFT DRAWER SIDE (D257). Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #2.
å
NOTE: The glides are not intended to rotate.
å
Fasten two KNOB SETS (130K) to the SMALL DRAWER FRONT (O2). Use two GOLD 1" MACHINE SCREWS (50S).
Repeat fastening two KNOB SETS (130K) to the remaining SMALL DRAWER FRONT (O2).
å
Fasten two KNOB SETS (130K) to a LARGE DRAWER FRONT (I2). Use two SILVER 1/2" MACHINE SCREWS (50S).
Repeat fastening the KNOB SETS (130K) to the remaining LARGE DRAWER FRONTS (I2).
1
2
1
2
D245
D262
D257
D271
O2
SILVER 1/2" MACHINE SCREW
(8 used for the LARGE DRAWER FRONTS)
38S
GOLD 1" MACHINE SCREW
(4 used for the DRAWER FRONTS)
50S
130K
130K
Glide end
Glide end
GOLD 5/16" FLAT HEAD SCREW
(24 used for the DRAWER SLIDES)
3S
1
2
1
2
I2