MEDIUM STORAGE CABINET 1/14
Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge In order to assist you in a timely manner, please have the following information ready: Model # _______________________ Part Number or Letter_______________________ Purchased at ___________________Date of Purchase ___________________________ If you wish to return the product, please contact the retailer where the product was purchased.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
IMPORTANT : Keep this manual for future reference. CARE and MAINTENANCE Wood Furniture Care Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION PARTS DESCRIPTION BL A BR Fron t/A vant Fron t/A vant ant t / Av Fron TOP QTY 1 C LEFT SIDE QTY 1 DL RIGHT SIDE QTY 1 DR ant t / Av Fron LEFT DOOR QTY 1 CENTRE SUPPORT QTY 1 E F RIGHT DOOR QTY 1 GL Fron t/A vant BOTTOM SHELF QTY 1 CABINET SHELF QTY 4 LEFT BACK PANEL QTY 1 GR RIGHT BACK PANEL QTY 1 NEED HELP? For help with assembly or if you are missing a part,Please call customer service 5/14
PRE-ASSEMBLY INFORMATION HARDWARE DESCRIPTION 2 1 2 3 ALLEN KEY SCREW M6 X 30 mm QTY 9 4 CAM LOCK PIN CAM LOCK QTY 9 SETS ALLEN KEY QTY 1 5 HANDLE M4 X 30 mm QTY 2 SET 7 6 PHILLIPS SCREW M3 X 12 mm QTY 12 PHILLIPS SCREW M3 X 15 mm QTY 8 8 PHILLIPS SCREW ROUND HEAD M4 X 15 mm QTY 23 10 9 MAGNET AND PLATE QTY 2 SETS 11 WOOD DOWEL Ø8 X 30 mm QTY 4 SHELF SUPPORT QTY 24 a. M4 X 25 - QTY 2 ( 1 is extra ) b. M4 X 15 - QTY 1 c.
COMPONENTS – KEY DIAGRAM A Fron t / Av ant GR GL BR C F F BL F F Fron t / Av ant Fron t / Av ant Fron t / Av ant Fron t / Av ant E DR DL 7/14
ASSEMBLY 2 BL Front / Avant STEP 1 BR Front / Avant E Front / Avant 10 1. Insert Wood dowels 10 into pre-drilled holes on Bottom Shelf E . 2. Use rubber mallet to tap Dowels 10 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Attach Cam Lock Pins 2 to Sides BL , BR using guide holes. 4. Align Cam Lock Pins 2 into pre-drilled holes on Bottom Shelf E . 5. Insert Cam Locks 2 into pre-drilled holes on Bottom Shelf E . 6.
ASSEMBLY STEP 3 2 1 3 Front / Avant BL C Front / Avant Front / Avant Front / Avant Front / Avant A BR 1. Attach Cam Lock Pins 2 into middle underneath of Top A using guide holes. 2. Align pre-drilled holes on bottom of Top A with pre-drilled holes on Sides BL , BR and insert Cam Lock Pins 2 into pre-drilled holes in Centre Support C . 3. Fix Top A to Sides BL , BR using Allen Key Screws 1 . Use Allen Key 3 to tighten Screws. Do not over-tighten. 4.
ASSEMBLY STEP 4 8 A Fron t/A vant DR BR BL C Fron t/A vant E 6 Fron t/A vant Fron t/A vant 5 DL 6 8 4 1. Attach hinges on Doors DL , DR to Sides BL , BR using Phillips Long Screws 5 . 2. Attach Magnet Plates 8 to bottom corner of Doors DL , DR using Phillips Short Screws 6 into guide holes on Doors DL , DR . 3. Attach Magnet 8 using Phillips Screws 6 into guide holes on Bottom Shelf E . 4. Use a Phillips screwdriver to attach Handles 4 to Doors DL , DR .
ASSEMBLY STEP 5 Warning Label Fron t/A vant 7 GL Fron t/A vant GR 1. Attach Back Panels GL , GR to back of cabinet using Phillips Screws Round Head 7 into pre-drilled guide holes. 2. Use Phillips screwdriver to tighten screws. STEP 6 F F 9 F F 1. Use 4 Shelf Supports 9 for each Cabinet Shelf F in desired location. 2. 2 Shelf Supports 9 may be used on back top of each Cabinet Shelf F as a tipping restraint.
FURNITURE TIP OVER RESTRAINT ASSEMBLY WARNING Serious or fatal crushing injuries can occur from furniture tip-over. If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. STEP 7 NOTE: The screwdriver is not included in the hardware pack.
FURNITURE TIP OVER RESTRAINT ASSEMBLY Furniture Tip Over Restraint Instructions: 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. x 3. 4. 5. 6. 7. Drill a 3/16 inch hole in the wall.
WARRANTY Thank you for purchasing product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line or by email. We reserve the right to repair or replace the defective product, at its discretion.
