Europe, Middle East ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ITALIANO ESPAÑOL PORTUGUÊS РУССКИЙ ČESTINA TÜRKÇE POLSKI SVENSKA SUOMI SLOVENCINA MAGYAR NYELV עברית العربية North America/ Norteamérica ENGLISH FRANÇAIS ESPAÑOL Latin America/ América Latina ENGLISH ESPAÑOL PORTUGUÊS Asia Pacific 日本語 繁體中文 한국어 ENGLISH
3 9 4 7 5 2 6 11 1 10 8
5
User Manual TECHNICAL FEATURES 1. TFRP pedal set 2. Rudder axis 3. Axes for independent differential 6. Adapter’s female RJ12 connector 7. Adapter’s USB connector 8. Adapter’s selector switch 9. Adapter’s LED 10. Removable heel-rests 11. Allen key brakes 4. Pedal set’s male RJ12 connector 5. RJ12/USB adapter (T.RJ12 USB Adapter) REMOVABLE HEEL-RESTS (10) The pedal set’s 2 heel-rests are removable.
INSTALLATION ON PC USING THE RJ12/USB ADAPTER 1. Connect the TFRP pedal set’s male RJ12 connector (4) to the female RJ12 connector (6) on the adapter (5). 2. Set the adapter’s selector switch (8) to the AIRPLANE position . 3. Go to https://support.thrustmaster.com/. Select Joysticks / TFRP T.Flight Rudder Pedals, then select Drivers. Download and install the PC driver and its custom Windows Control Panel-based interface. 4.
AVAILABLE AND COMPATIBLE ADVANCED SOFTWARE APPLICATIONS (only with the TFRP pedal set, when connected to the RJ12/USB adapter) ADVANCED CALIBRATION SOFTWARE (T.RJ12 USB ADAPTER Calibration Tool) Go to https://support.thrustmaster.com. Select Joysticks / TFRP T.Flight Rudder Pedals, then select Utilities.
IMPORTANT NOTES REGARDING AUTOMATIC CALIBRATION OF AXES To avoid any calibration problems: - Always leave the rudder axis centered (without placing your feet on the rudder) when connecting the TFRP pedal set using the adapter’s USB connector. - Never connect the pedal set to the adapter when the adapter is connected to a PC or during a game. - Never disconnect the pedal set from the adapter when the adapter is connected to a PC or during a game. Power off the PC first.
TROUBLESHOOTING AND WARNING • My pedal set is not working properly, or seems to be improperly calibrated. - Power off your PC and disconnect the adapter’s USB connector. Then reconnect the USB connector, power on your PC again, and restart your game. - Make sure that the adapter’s selector switch (8) is set to the AIRPLANE position, and that the LED is lit up in GREEN. - When connecting the adapter’s USB connector, always leave the rudder axis centered (without placing your feet on the rudder).
CONSUMER WARRANTY INFORMATION Worldwide, Guillemot Corporation S.A., whose registered office is located at Place du Granier, B.P. 97143, 35571 Chantepie, France (hereinafter “Guillemot”) warrants to the consumer that this Thrustmaster product shall be free from defects in materials and workmanship, for a warranty period which corresponds to the time limit to bring an action for conformity with respect to this product.
Liability If permitted under applicable law, Guillemot Corporation S.A.
COPYRIGHT © 2019 Guillemot Corporation S.A. All rights reserved. Thrustmaster® is a registered trademark of Guillemot Corporation S.A. Windows® is a registered trademark of Microsoft Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners. Illustrations not binding. Contents, designs and specifications are subject to change without notice and may vary from one country to another. Made in China.
