Manual
Table Of Contents
- Couv-TSShandbrakeSparco+_num
- 01_Eng_TSS_Handbrake_Plus
- 02_Fra_TSS_Handbrake_Plus
- 03_Ger_TSS_Handbrake_Plus
- 04_Ned_TSS_Handbrake_Plus
- 05_Ita_TSS_Handbrake_Plus
- 06_Spa_TSS_Handbrake_Plus
- 07_Por_TSS_Handbrake_Plus
- 08_Por_Bra_TSS_Handbrake_Plus
- 09_Rus_TSS_Handbrake_Plus
- 10_Gre_TSS_Handbrake_Plus
- 11_Tur_TSS_Handbrake_Plus
- 12_Pol_TSS_Handbrake_Plus
- 13_JA_TSS_Handbrake_Plus
- 14_CNT_TSS_Handbrake_Plus
- 15_KO_TSS_Handbrake_Plus
- Ar_TSS_Handbrake_Plus
![](/manual/thrustmaster/4060107/manual-arabic-german-greek-english-spanish-french-italian-japanese-korean-dutch-polish-portuguese-russian-turkish-vietnamese-chinese/images/img-6.png)
5/16
CONFIGURING THE SEQUENTIAL SHIFTER MODE
1. Raise the HANDBRAKE / SHIFTER selector (3) in the SEQUENTIAL SHIFTER mode position.
Front face of base
2. To switch from the HANDBRAKE mode to the SEQUENTIAL SHIFTER mode (4), use the 3 mm
Allen wrench (8) to slightly unscrew the mechanical system’s screws (2 screws, located to either
side of the base).
3. Move these 4 screws (2 screws, located on either side of the base) to the SEQ position.
Left side of base
Right side of base
4. Check that these 4 screws (2 on either side of the base) are perfectly repositioned, then tighten
them using the 3 mm Allen wrench (8).