Europe, Middle East ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ITALIANO ESPAÑOL PORTUGUÊS РУССКИЙ ČESTINA TÜRKÇE POLSKI SVENSKA SUOMI SLOVENCINA MAGYAR NYELV עברית العربية North America/ Norteamérica ENGLISH FRANÇAIS ESPAÑOL Latin America/ América Latina ENGLISH ESPAÑOL PORTUGUÊS Asia Pacific 日本語 繁體中文 한국어
PC – PS4™ – Xbox One® User Manual TECHNICAL SPECIFICATIONS 1 Detachable lever (not installed by default) 2 Lever attachment arms 3 HANDBRAKE / SEQUENTIAL SHIFTER selector 4 Mechanical switching system (for switching between the HANDBRAKE and SEQUENTIAL SHIFTER modes) 5 DIN cable and female connector on base 6 7 8 9 10 11 1/16 Detachable male DIN / USB cable 13 mm wrench key 3 mm Allen wrench 6 mm Allen wrench 2 BTR M8 screws + 2 M8 nuts Detachable mini-DIN / DIN cable
WARNING Before using this product, be sure to read through this manual carefully. Retain this manual for future reference. Warning – Electric shock * Keep this product in a dry place, and do not expose it to dust or sunlight. * Respect the direction of insertion for connectors. * Do not twist or pull on the connectors and cables. * Do not spill liquid on the product or its connector. * Do not short-circuit the product.
INSTALLING THE DETACHABLE LEVER (1) ON THE ATTACHMENT ARMS (2) 1. Slide the detachable lever (1) between the attachment arms (2). 2. Adjust the lever at the desired height. The lever’s total height (knob included) can be adjusted between 21 cm and 30 cm. 3. Attach the lever to the attachment arms using 2 BTR M8 screws (10), 2 M8 nuts (10) and the 6 mm Allen wrench (9).
CONFIGURING THE HANDBRAKE MODE By default (when unboxing the device), the TSS HANDBRAKE is configured in the HANDBRAKE mode. 1. The HANDBRAKE / SHIFTER selector (3) is lowered in the HANDBRAKE mode position. Front face of base 2. The mechanical system that lets you switch from the HANDBRAKE mode to the SEQUENTIAL SHIFTER mode (4) is preset in the HANDBRAKE position.
CONFIGURING THE SEQUENTIAL SHIFTER MODE 1. Raise the HANDBRAKE / SHIFTER selector (3) in the SEQUENTIAL SHIFTER mode position. Front face of base 2. To switch from the HANDBRAKE mode to the SEQUENTIAL SHIFTER mode (4), use the 3 mm Allen wrench (8) to slightly unscrew the mechanical system’s screws (2 screws, located to either side of the base). 3. Move these 4 screws (2 screws, located on either side of the base) to the SEQ position. Left side of base Right side of base 4.
INSTALLING THE TSS HANDBRAKE The TSS HANDBRAKE can be attached to a variety of compatible supports (sold separately), using the M6 threaded holes located on either side of the device and under its base: • 3 threaded holes are located on the left side of the base. • 3 threaded holes are located on the right side of the base. • 8 threaded holes are located under the base. The TSS HANDBRAKE cockpit installation template is available from https://support.thrustmaster.com.
DO NOT TIGHTEN OR LOOSEN THESE SCREWS With the exception of the screws relating to the mechanical system used to switch from the HANDBRAKE mode the SEQUENTIAL SHIFTER mode (4), never tighten or loosen any screws located on the TSS HANDBRAKE base.
INSTALLATION INSTRUCTIONS FOR PC 1. Go to https://support.thrustmaster.com to download the PC drivers. Select Racing Wheels / TSS HANDBRAKE, then select Drivers. 2. Once the download is finished, run the installation program, and follow the instructions displayed onscreen. 3. When prompted to do so by the installation program, connect the TSS HANDBRAKE to one of your PC’s USB ports using the detachable male DIN / USB cable (6), and finish installing the driver. 4.
On PC, when the TSS HANDBRAKE is connected to a USB port using the detachable male DIN / USB cable (6), the TSS HANDBRAKE is compatible: - with HANDBRAKE mode [Progressive] and SEQUENTIAL SHIFTER mode [+/-]; - in all games supporting multi-USB, separate handbrakes and shifters; - with all racing wheels on the market.
INSTALLATION ON PS4™ AND XBOX ONE® On PS4™ and Xbox One®, the TSS HANDBRAKE is compatible with the following racing wheel bases: • Thrustmaster T-GT and T300 on PS4™ • Thrustmaster TS-XW Racer and TX on Xbox One® IMPORTANT: in order to ensure optimal performance of the TSS HANDBRAKE on PS4™ and Xbox One®, you must update the firmware of your racing wheel base (T-GT, T300, TS-XW Racer or TX) with the latest version available at https://support.thrustmaster.com/. Installation: 1.
TSS HANDBRAKE CONNECTION SUMMARY ACCORDING TO THE PLATFORM USED TSS HANDBRAKE connection PC (HANDBRAKE mode and SEQUENTIAL SHIFTER mode) PC (SEQUENTIAL SHIFTER mode only) PS4™ (HANDBRAKE mode and SEQUENTIAL SHIFTER mode) XBOX ONE® (HANDBRAKE mode and SEQUENTIAL SHIFTER mode) To the PC, using the detachable male DIN / USB cable (6). Compatible with all racing wheels on the market. At the back of a compatible Thrustmaster racing wheel base, using the detachable mini-DIN / DIN cable (11).
ADVANCED CALIBRATION SOFTWARE The TSS HANDBRAKE’s calibration procedure is automatic. An advanced calibration software application for PC is also available at https://support.thrustmaster.com: select Racing Wheels / TSS HANDBRAKE, then Software. This software allows you to adjust the following: • Analog travel in HANDBRAKE mode; • Analog travel in SEQUENTIAL SHIFTER mode.
ECOSYSTEM The TSS HANDBRAKE is also compatible with other accessories sold separately: * The TM RACING CLAMP: a sturdy support bracket allowing gamers to securely mount their TSS Handbrake and their TH8A shifter directly on a table or desk, without the need for a cockpit. * The TM SIM HUB: a hub allowing users to simultaneously connect up to four accessories directly to the mini-DIN connector located at the back of compatible Thrustmaster racing wheel bases.
CONSUMER WARRANTY INFORMATION Worldwide, Guillemot Corporation S.A., whose registered office is located at Place du Granier, B.P. 97143, 35571 Chantepie, France (hereinafter “Guillemot”) warrants to the consumer that this Thrustmaster product shall be free from defects in materials and workmanship, for a warranty period which corresponds to the time limit to bring an action for conformity with respect to this product.
Additional warranty provisions During the warranty period, Guillemot shall not provide, in principle, any spare parts, as Technical Support is the only party authorized to open and/or recondition any Thrustmaster product (with the exception of any reconditioning procedures which Technical Support may request that the consumer carry out, by way of written instructions – for example, due to the simplicity and the lack of confidentiality of the reconditioning process – and by providing the consumer with the re
DECLARATION OF CONFORMITY CANADIAN COMPLIANCE NOTICE: this Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. USA COMPLIANCE NOTICE: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.