Operation Manual

51100727 - E
3
1.1 instaLLinG the thULe stroLLinG Kit
A. Press and hold in the caster button on one of the
VersaWings™. (See image 1)
B. Insert the caster shaft up into the caster hole.
(See image 2)
C. Release the caster button.
D. Verify that the caster wheel is securely attached to the
Thule child carrier by giving it a sharp pull downward.
1.2 storinG the thULe stroLLinG Kit
.
A. Press the caster button on one of the VersaWings™
and insert the caster shaft from the top down into
the caster hole. (See image 3)
B. Repeat for the other caster wheel.
C. Removal is the opposite to installation.
D. Verify that the caster wheel is securely attached to the
Thule child carrier by giving it a sharp pull upward.
2
WARNING
Always make sure that the stroller wheels are
properly and fully engaged and locked. To
check this move the stroller wheels up and
down in a vertical direction. Make sure the
plastic locking button has fully clicked back out.
1 3
NOTI CE
It is recommended that wheel shafts be checked
regularly. If loose shafts are noticed, it is
recommended to service the kit. Refer to the next
page for servicing instructions.