THANK YOU FOR CHOOSING THE PORTABLE 24,000mAh JUMP STARTER Always follow basic safety precautions when using electrical appliances. Read all instructions carefully and please keep this instruction manual for reference.
IMPORTANT SAFETY WARNINGS 1. Read the instruction manual carefully before using this unit. 2. Jump start 12V vehicles only as it would be hazardous for other vehicles. It is not recommended to use this unit with other machines such as aircrafts and boats. 3. Be cautious when using this unit. 4. DO NOT use this unit if any cable clamps or cords are damaged. 5. DO NOT use this in place of a vehicle battery. 6. DO NOT use this as a battery charger. 7.
IMPORTANT SAFETY WARNINGS (CONTINUED) 24. DO NOT drop the unit. If this unit is dropped or damaged in any way it must be checked by a qualified battery technician. 25. DO NOT store in locations where the temperature may exceed 70°C. 26. Only charge at ambient temperatures between 0°C and 60°C. 27. Only charge this unit using the charger provided. 28. DO NOT use the unit to jump start a vehicle while charging the internal battery. 29.
INCLUDED IN THE BOX 1 24,000mAh Jump Starter 2 Intelligent jumper cable 3 Multi USB connector 4 240V plug 5 Micro USB connector 6 User manual x 1 CHARGING INSTRUCTIONS Charging the Jump Starter 1. Plug the home adaptor into the 240V power socket. 2. Connect the micro connector to the quick charge input port. Power Indicator Press the power button to check the storage level of the Thunder 24,000mAh Jump Starter.
JUMP STARTING INSTRUCTIONS Jump Starting 12V Vehicles 1. Connect the blue plug fully seated into the host, and make sure the cable indicator is off. 2. Connect the red clamp to the positive (+) battery terminal, and the black clamp to the negative (-) battery terminal. reverse 3. Follow the instructions of the cable indicator as below. correct BOOST CABLE INDICATOR INSTRUCTIONS Green light on This means the connection is correct and the circuit is working.
POWERING DEVICES Charging a Mobile Phone or Tablet 1. Plug the device cable to the quick charge USB output port. 2. Select the appropriate connector and connect it to your mobile phone or tablet. 3. Press the power button, it will recognise the device’s suitable parameters, and will start to charge your device. Power Supply to 12V Vehicle Products or 12V Electronics 1. Plug the optional cable with cigarette lighter plug into the 12V 10A output port. 2.
TROUBLESHOOTING Problem There is no response when pressing the power button. Reason This means there is a low voltage protection of the Thunder 24,000mAh Jump Starter. Solution Recharge the unit. Plug the adaptor into the quick charge input port. FAQs Q: How do I turn off my Thunder 24,000mAh Jump Starter? A: It will automatically turn off when it has finished loading or when charging is complete.
WARRANTY When you acquire or fit a Thunder product you have the peace of mind in knowing that it is backed by a comprehensive 12 month warranty against defects in materials and workmanship. The Thunder warranty is provided in addition to any rights you may have under the Australian Consumer Law. All claims under this warranty should be made by returning the product to the place of purchase at your expense, with the detail of the fault, proof of purchase and fitment details.
