THANK YOU FOR CHOOSING THE THUNDER 12V 800 PEAK AMP JUMP STARTER & POWER BANK Always follow basic safety precautions when using electrical appliances. Read all instructions carefully and please keep this instruction manual for reference.
IMPORTANT SAFETY WARNINGS 1. Read the instruction manual carefully before using this unit. 2. Jump start for 12V vehicles only. Do not use on other sized vehicles. 3. Exercise caution while using this unit. 4. Only use the jumper cable provided with this unit. 5. M ake sure the blue plug of the jumper cable is plugged fully into jumping socket, otherwise, the blue plug will melt. 6. M ake sure to check all the battery connections are clean before jump starting.
IMPORTANT SAFETY WARNINGS (CONTINUED) 22. Do NOT allow use by young or infirm persons without supervision. 23. Do NOT use as a toy. 24. Do NOT allow the product to become wet. 25. Do NOT immerse the product in water. 26. Do NOT operate the product in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. 27. Do NOT modify or disassemble the unit. Only a qualified repair technician may repair this unit. 28. Do NOT expose product to extreme heat or fire. 29. Do NOT drop unit.
INCLUDED IN THE BOX 1 Thunder 12V 800 Peak Amp Jump Starter & Power Bank 2 Intelligent jumper cable 3 Multi USB connector 4 240V plug 5 Micro USB connector 6 12V 10A cigarette socket cable 7 User manual x 1 CHARGING INSTRUCTIONS Charging the Jump Starter 1. Plug the home adaptor into the power socket. 2. Connect the micro connector to the quick charge input port of the Thunder 12V 800 Peak Amp Jump Starter & Power Bank.
JUMP STARTING INSTRUCTIONS Jump Starting 12V Vehicles 1. Connect the blue plug to the unit and make sure the cable indicator is off. The plug must be fully seated into the host. 2. Connect the red clamp to the positive (+) battery terminal, and the black clamp to the negative (-) battery terminal. reverse correct BOOST 3. Start the vehicle. 4. When the vehicle has been jump started, remove the jumper cable from the vehicle and leave the engine running.
POWERING DEVICES Charging a Mobile Phone or Tablet 1. Plug the device cable to the quick charge USB output port. 2. Select the appropriate connector and connect it to your mobile phone or tablet. 3. Press the Power switch button; it will automatically adjust output to provide the optimum charge for mobile devices. Power Supply to 12V Vehicle Products or 12V Electronics 1. Plug the cigarette lighter plug into the 12V 10A output port. 2. Connect the device cable and 12V vehicle product or 12V electronics.
TROUBLESHOOTING Problem There is no response when pressing the power button. Reason This means there is a low voltage protection on the Thunder 800 CCA Jump Starter. Solution Recharge the unit. Plug the adaptor into the quick charge input port. FAQs Q: How do I turn off my Thunder 12V 800 Peak Amp Jump Starter & Power Bank? A: It will automatically turn off when it has finished loading or when charging is complete.
WARRANTY When you acquire or fit a Thunder product you have the peace of mind in knowing that it is backed by a comprehensive 12 month warranty against defects in materials and workmanship. The Thunder warranty is provided in addition to any rights you may have under the Australian Consumer Law. All claims under this warranty should be made by returning the product to the place of purchase at your expense, with the detail of the fault, proof of purchase and fitment details.
