CONGRATULATIONS ON YOUR PURCHASE OF YOUR THUNDER POWER BOX For your personal safety please read, understand and follow the information provided in this instruction manual.
PRODUCT FEATURES 3 4 2 5 1 6 1 2 x 10 Amp accessory sockets 4 2 x wired blank connectors 2 2 x 2.4 Amp USB sockets 5 In-built voltmeter 3 1 x Anderson style outlet 6 In-built circuit breaker connection CONNECTION AND OPERATION 1. Connect the power distribution box to a 12 volt DC power source using the rear Anderson style plug. 2. The LCD screen will display the voltage of the power source and the amps being drawn from the distribution box.
FITTING INSTRUCTIONS On the sides of the unit there are provisions to add extra outlets. See below for fitting instructions: 4. Insert the socket into the square cover and fasten from behind (see images 5 and 6). 1. 5. Attach the red cable to the positive (+) connector and the black cable to the negative (-) connector (see images 7 and 8). Ensure unit is not connected to a power source. 2.
GPC Asia Pacific Pty Ltd ABN 97 097 993 283 51-57 Qantas Drive Brisbane Airport QLD 4007 AUSTRALIA thunderauto.com.au // thunderauto.co.
