CONGRATULATIONS ON THE PURCHASE OF YOUR THUNDER BAR DRIVING LIGHT For your personal safety read, understand and follow the information provided in this instruction manual.
FEATURES • High output 3W Cree LEDs • Fully sealed and waterproof (IP67) • Bright/white light output (6,000K) • Pre-wired weatherproof connector • Precision extruded die cast aluminium housing • 12/24V dual voltage • Stainless steel mounting brackets and hardware • 12 month LED warranty • Virtually unbreakable polycarbonate lens IMPORTANT SAFETY WARNINGS • Remove the vehicle’s negative battery cable before installation • • Ensure the lights are mounted securely to a solid surface on th
TECHNICAL SPECIFICATIONS SPECIFICATIONS VOLTAGE 12/24 dual voltage with reverse polarity LEDS 3W Cree HOUSING Extruded die cast aluminium housing REFLECTOR Spot beam LENS Polycarbonate COLOUR TEMPERATURE 6,000K CURRENT DRAW 1.5A to 8.0A @ 12V PART NO. AMPS LUMENS TDR08112 1.5 2,000 TDR08120 3.0 4,200 TDR08140 6.0 8,400 TDR08224 8.
INSTALLATION INSTRUCTIONS SINGLE ROW Spacer M6 Cup Screw Spacer M6 Screw Bull Bar / Mount M6 Screw Adjust Beam Tighten Screw Bracket Bracket Bracket Reversed M6 Spring Washer BRACKET ASSEMBLY M6 Spring Washer ALTERNATE BRACKET ASSEMBLY M6 Spring Washer M6 Flat Washer M6 Nut LIGHT BAR MOUNTING LIGHT BAR ADJUSTMENT DUAL ROW M6 Spring Washer Spacer M6 Spring Spacer Washer M6 Screw M6 Screw Note: Spacer can be used on either side of the bracket Bracket Installation Instructions M8 Cup
WIRING INSTRUCTIONS BLACK WIRE Earth - Connect this wire to the chassis earth or negative (-) battery terminal RED WIRE Driving Light - Connect this wire to the positive (+) output of a relay. Relay pin 87 or 87a WIRING STEPS 1. Disconnect the vehicle’s negative battery cable before commencing any wiring. 2. Mount a suitable relay in the vehicle’s engine bay away from direct heat and water. 3. Install a wire from the positive battery terminal to pin 30 of the relay.
WIRING DIAGRAM RELAY CONNECTIONS PIN 30 Power in PIN 85 Earth PIN 86 Switch PIN87 Power Out Power Out BATTERY LIGHT BAR EARTH 85 RELAY 30 FUSE 6 Wiring Diagram 87 86 HIGH BEAM ACTIVE SWITCH
WARRANTY TERMS & CONDITIONS When you acquire or fit a Thunder product you have the peace of mind in knowing that it is backed by a comprehensive 12 month warranty against defects in materials & workmanship. The Thunder warranty is provided in addition to any rights you may have under the Australian Consumer Law. All claims under this warranty should be made by returning the product to the place of purchase at your expense, with the detail of the fault, proof of purchase & fitment details.
GPC Asia Pacific Pty Ltd ABN 97 097 993 283 5 Viola Place, Export Park Brisbane Airport QLD 4007 AUSTRALIA thunderauto.com.au // thunderauto.co.
