Data Sheet
Table Of Contents
- 5.User Manual
- Revision History
- Table List
- About This Document
- Table of Contents
- Chapter 1. Overview
- Chapter 2. Interfaces Description
- 2.1. Interfaces parameter definitions
- 2.2. Pin description
- 2.3. Interfaces detail description
- 2.3.1. Power supply interface
- 2.3.2. RGMII interfaces
- 2.3.3. SPDIF interface
- 2.3.4. Audio interface
- 2.3.5. USB interface
- 2.3.6. PCIe interface
- 2.3.7. MIPI DSI interface
- 2.3.8. HDMI interface
- 2.3.9. JTAG interface
- 2.3.10. SDIO interface
- 2.3.11. BLSP interface
- 2.3.12. Power on interface
- 2.3.13. Reset interface
- 2.3.14. Boot configuration interface
- 2.3.15. Debug UART interface
- 2.3.16. PWM
- 2.3.17. Sleep clock
- 2.3.18. SPMI
- 2.3.19. Antenna interface
- Chapter 3. Electrical Characteristics
- Appendix 1. Notices
- Appendix 2. Trademarks
- 5.User Manual_ Warning
Thundercomm TurboX C40x SOM Datasheet
- 10 -
2.2. Pin description
Figure 2-1 TurboX C40x PIN Map (Top View)
Table 2-2. Pin List
Pad# Function Voltage Type Function description
1 MIPI_DSI0_CLK_M - -
MIPI display serial interface 0 clock negative.
For TurboX C404 and C403: do not connect.
2 MIPI_DSI0_CLK_P - -
MIPI display serial interface 0 clock positive.
For TurboX C404 and C403: do not connect.
3 GND - - -
4 MIPI_DSI0_L2_M - -
MIPI display serial interface 0 lane 2 negative
For TurboX C404 and C403: do not connect.
5 MIPI_DSI0_L2_P - -
MIPI display serial interface 0 lane 2 positive.
For TurboX C404 and C403: do not connect.
6 GND - - -
7 MIPI_DSI0_L3_M - -
MIPI display serial interface 0 lane 3 negative
For TurboX C404 and C403: do not connect.
8 MIPI_DSI0_L3_P - -
MIPI display serial interface 0 lane 3 positive.
For TurboX C404 and C403: do not connect.
9 GND - - -
10 PCIE0_TX_P - DO PCIE transmitter plus
11 PCIE0_TX_M - DO PCIE transmitter minus
12 GND - - -
13 USB0_HS_DM - IO USB0 HS data minus
14 USB0_HS_DP - IO USB0 HS data plus
15 GND - - -
16 GPIO_35 1.8V IO Can be configured as GPIO
nicholas.wang_thundercomm.com
2022-07-21 2:34:47 AM CST