Users Manual
Table Of Contents
- 2Functional Overview
- 3Interfaces Description
- 3.1Interfaces Parameter Definitions
- 3.2Interfaces Detail Description
- 3.2.1Power Supply Interface
- 3.2.2Touchscreen Interface
- 3.2.3Display Interface
- 3.2.4Camera Interfaces
- 3.2.5Audio Interface
- 3.2.6USB & DisplayPort Interface
- 3.2.7 PCIe Interface
- 3.2.8 SSC Interface
- 3.2.9 SDIO Interface
- 3.2.10 QUP Interface
- 3.2.11Power on Interface
- 3.2.12Reset Interface
- 3.2.13 Keys Interface
- 3.2.14 Sensor Interrupt Interface
- 3.2.15Debug UART Interface
- 3.2.16Battery Interface
- 3.2.17ADCs Interface
- 3.2.18 PWMs and LED Current Driver Interface
- 3.2.19Antenna Interface
- 4Connector PIN Summary
- 5Electrical Characteristics
Thundercomm TurboX D845 System on Module
Copyright © 2018 All Rights Reserved , Thundercomm Technology Co., Ltd.
14
2.4 ISP(ISP280)
IFE: Image front-end engine
Bayer process for preview/video only
Stats for 3A
Muti-pass outputs feeding to IPE
IPE: Image processing engine, consists of 2 parts
NPS: Noise processing segment
PPS: Post processing segment
BPS: Bayer processing segment
Bayer process and noise reduction for snapshot only
Simple stats for special offline processing
Muti-pass outputs feeding to IPE
2.5 Connection
2 x 2 802.11ac with MU-MIMO
160 MHz & DBS support
Bluetooth 5.0
Optional dedicated BT antenna support concurrent operation for WLAN and BT with and without
dedicated BT antenna
RF performance meets all carrier requirments
Industry leading throughput
Low power island on MSM for lowest Wi-Fi power consumption (up to 61% improvement)
BT/BTLE integration within WCN3990 for lowest BT power consumption (up to 87% improvement)