Users Manual
Table Of Contents
- 2Functional Overview
- 3Interfaces Description
- 3.1Interfaces Parameter Definitions
- 3.2Interfaces Detail Description
- 3.2.1Power Supply Interface
- 3.2.2Touchscreen Interface
- 3.2.3Display Interface
- 3.2.4Camera Interfaces
- 3.2.5Audio Interface
- 3.2.6USB & DisplayPort Interface
- 3.2.7 PCIe Interface
- 3.2.8 SSC Interface
- 3.2.9 SDIO Interface
- 3.2.10 QUP Interface
- 3.2.11Power on Interface
- 3.2.12Reset Interface
- 3.2.13 Keys Interface
- 3.2.14 Sensor Interrupt Interface
- 3.2.15Debug UART Interface
- 3.2.16Battery Interface
- 3.2.17ADCs Interface
- 3.2.18 PWMs and LED Current Driver Interface
- 3.2.19Antenna Interface
- 4Connector PIN Summary
- 5Electrical Characteristics
Thundercomm TurboX D845 System on Module
Copyright © 2018 All Rights Reserved , Thundercomm Technology Co., Ltd.
3
OpenGL ES 3.2 + AEP, DX next, Vulkan 2
OpenCL 2.0 full profile, RenderScript
Audio (build in TurboX D845 Carrier Board)
Codec
Five DACs, five outputs
five differential analog inputs; four ADCs
Six digital microphones
Open DSP CPE voice activation subsystem for ultra low-power voice wake-up
Native DSD (WCD9341 only), MBHC, and ANC
130 dB dynamic range, 32-bit DAC
Low-power audio
Low-power, low-complexity; 7.1 surround sound
Voice codec
support
QCELP, EVS, EVRC, EVRC-B, EVRC-WB; G.7 Gen, G.729A/AB;
GSM-FR, GSM-EFR and GSM-HR; AMR-NB and AMR-WB
Enhanced audio
Surround sound: advanced multichannel
Fluence
TM
Pro noise cancellation; enhanced speaker protection
Qualcomm enhance 3D audio solution, Qualcomm stereo audio expansion feature,
and Qualcomm intelligent mixing algorithm
Wireless connectivity
WLAN
2.4G/5G, support 802.11 a/b/g/n/ac, 2 X 2 MIMO
Bluetooth
Support Bluetooth 5.0 + HS
BLE
Connectivity