Users Manual
Table Of Contents
- 2Functional Overview
- 3Interfaces Description
- 3.1Interfaces Parameter Definitions
- 3.2Interfaces Detail Description
- 3.2.1Power Supply Interface
- 3.2.2Touchscreen Interface
- 3.2.3Display Interface
- 3.2.4Camera Interfaces
- 3.2.5Audio Interface
- 3.2.6USB & DisplayPort Interface
- 3.2.7 PCIe Interface
- 3.2.8 SSC Interface
- 3.2.9 SDIO Interface
- 3.2.10 QUP Interface
- 3.2.11Power on Interface
- 3.2.12Reset Interface
- 3.2.13 Keys Interface
- 3.2.14 Sensor Interrupt Interface
- 3.2.15Debug UART Interface
- 3.2.16Battery Interface
- 3.2.17ADCs Interface
- 3.2.18 PWMs and LED Current Driver Interface
- 3.2.19Antenna Interface
- 4Connector PIN Summary
- 5Electrical Characteristics
Thundercomm TurboX D845 System on Module
Copyright © 2018 All Rights Reserved , Thundercomm Technology Co., Ltd.
34
55 BLSP_SPI2_MISO 56 MI2S2_WS
57 BLSP_SPI2_MOSI 58 MI2S2_SCK
59 LCD_TE0 60 MI2S2_DATA0
61 LCD_RST_N 62 MI2S2_DATA1
63 GPIO_42 64 MI2S3_WS
65 GPIO_44 66 MI2S3_DATA1
67 GPIO_52 68 MI2S3_DATA2
69 GPIO_50 70 MI2S3_DATA0
71 GPIO_134 72 MI2S3_DATA3
73 GPIO_122 74 MI2S3_SCK
75 GPIO_124 76 APPS_I2C10_SCL
77 GPIO_49 78 APPS_I2C10_SDA
79 BLSP_SPI0_CS_L 80 MI2S1_WS
81 BLSP_SPI0_MOSI 82 MI2S1_MCLK
83 BLSP_SPI0_MISO 84 MI2S1_SCK
85 BLSP_SPI0_CLK 86 MI2S1_DATA1
87 CC_DIR 88 MI2S1_DATA0
89 CODEC_RST_N 90 CODEC_SPI_MISO
91 CODEC_SPI_CLK 92 CODEC_INT1_N
93 CODEC_SPI_MOSI 94 CODEC_INT2_N
95 CODEC_SPI_CS_N 96 BLSP_SPI11_MOSI
97 GND 98 BLSP_SPI11_MISO
99 USB2_SS_RX_M 100 BLSP_SPI11_CLK
101 USB2_SS_RX_P 102 BLSP_SPI11_CS_L
103 GND 104 GND
105 USB2_SS_TX_P 106 USB2_HS_DP
107 USB2_SS_TX_M 108 USB2_HS_DM
109 GND 110 GND
111 USB1_SS_RX1_P 112 USB1_SS_TX1_M
113 USB1_SS_RX1_M 114 USB1_SS_TX1_P