Users Manual
Table Of Contents
- 2Functional Overview
- 3Interfaces Description
- 3.1Interfaces Parameter Definitions
- 3.2Interfaces Detail Description
- 3.2.1Power Supply Interface
- 3.2.2Touchscreen Interface
- 3.2.3Display Interface
- 3.2.4Camera Interfaces
- 3.2.5Audio Interface
- 3.2.6USB & DisplayPort Interface
- 3.2.7 PCIe Interface
- 3.2.8 SSC Interface
- 3.2.9 SDIO Interface
- 3.2.10 QUP Interface
- 3.2.11Power on Interface
- 3.2.12Reset Interface
- 3.2.13 Keys Interface
- 3.2.14 Sensor Interrupt Interface
- 3.2.15Debug UART Interface
- 3.2.16Battery Interface
- 3.2.17ADCs Interface
- 3.2.18 PWMs and LED Current Driver Interface
- 3.2.19Antenna Interface
- 4Connector PIN Summary
- 5Electrical Characteristics
Thundercomm TurboX D845 System on Module
Copyright © 2018 All Rights Reserved , Thundercomm Technology Co., Ltd.
41
PCI Express Specification, Revision 3.0
None
Table 5.7- 1 PCIe
5.7 DisplayPort
The SOM supports DisplayPort standards and exceptions
Applicable standard Feature exceptions
VESA DisplayPort V1.4
HBR3
Table 5.8- 1 DP
5.8 SLIMbus
The SOM supports SLIMbus HDMI standards and exceptions
Applicable standard Feature exceptions
MIPI Alliance Specification for Serial Low-power Interchip Media Bus
Version 1.01.01
None
Table 5.9- 1 SLIMbus
5.9 SDIO
The SOM Supports SD standards and exceptions
Applicable standard Feature exceptions
Secure Digital: Physical Layer Specification version 3.0
None
SDIO Card Specification version 3.0 None
Table 5.10- 1 SDIO
5.10 I2S
The SOM I2S standards and exceptions:
Legacy I2S interfaces for primary and secondary microphones and speakers.
The multiple I2S (MI2S) interface for microphone and speaker functions.
It is supports both master and slave mode.
Supports 16, 24, or 32-bit resolution audio samples
Supports 8, 16, 32, 48, 96 and192 kHz sampling rate in Master mode, and all standard sample rates in Slave