User's Manual
Table Of Contents
- I. General
- III. Technical Specifications
- IV. Structure and Working Principle
- 2. Working principle
- The detector uses a high-precision thermistor sens
- V. Installation
- 1. Points for on-site installation
- The wireless performance indicators of this produc
- VI. Test
- Warning: Please make sure that the polarity of the
- 1. The detector must be tested after installation
- 2. Simulated fire alarm: After successfully connec
- 3. During the test, the unqualified detector shall
- VII. Use and Operation
- 1. Network segment setting: Before the detector co
- 2. The device enters and exits the network: After
- A) Network access operation: When the control pane
- B) Network exit operation: When the control panel
- 3. Equipment alarm: When the temperature in the en
- 4. Device reset: When the device reports a fire al
- 5. Restore factory settings: After the detector is
- Note: The button function only has one click, thre