User's Manual
Table Of Contents
- I.General
- II.Features
- 1. Adopting 470MHz wireless communication technolo
- 2. With battery low-voltage detection function, it
- 3. Use microprocessor to realize signal processing
- III.Technical specifications
- IV.Structure characteristics and working principle
- When there is a fire alarm, after the module recei
- When the battery of the input module is low, the m
- V.Installation method
- VI.Use and operation
When there is a fire alarm, after the module receives the closing signal, it will send relevant
information signals to the controller through wireless communication technology. After the
controller responds to the information signal, the red light of the input module is always on.
When the battery of the input module is low, the module sends a battery undervoltage signal to
the controller, and the Fault Indicator flashes twice every 48 seconds.
V. Installation method
1. Before installation, first check whether the shell is intact and whether the identification is
complete.
2. Input module fixing method:
When installing, use two screws to fix the module base on the 86 series (width 72mm,
height 49mm, depth 47mm) embedded box, and then install the button front panel, the
installation hole distance is 60mm.
Fig.2 Installation method