User's Manual
Table Of Contents
- I.General
- II.Features
- 1. Adopting 470MHz wireless communication technolo
- 2. With battery low-voltage detection function, it
- 3. Use microprocessor to realize signal processing
- III.Technical specifications
- IV.Structure characteristics and working principle
- When there is a fire alarm, after the module recei
- When the battery of the input module is low, the m
- V.Installation method
- VI.Use and operation
Fig. 3 Installation hole distance
AS1, AS2: Passive answer signal input
Fig. 4 Wiring diagram
Test
Warning: Please make sure that the polarity of the battery is correct before proceeding.
1. The input module should be tested every year after installation and during use.
2. Input signal test: After the networking is successful, the relevant input signal conditions of the
input module are artificially satisfied (please turn off the fire alarm linkage function to avoid
unnecessary alarm linkage). After the test, use the operation controller reset to reset the input
module, and Notify the relevant management department to restore the system to normal.
3. During the test, the unqualified input modules are resolved according to "general failure and
repair" and "maintenance".