User's Manual
Table Of Contents
- I.General
- II.Features
- 1. Adopting 470MHz wireless communication technolo
- 2. With battery low-voltage detection function, it
- 3. Use microprocessor to realize signal processing
- III.Technical specifications
- IV.Structure characteristics and working principle
- When the module input terminal receives the closin
- When the module receives the control signal from t
- When the module battery is low, the module sends a
- 3.Installation method
- V.Test
- Warning: Please make sure that the polarity of the
- 1. After the module is installed and tested every
- 2. Alarm test: After the networking is successful,
- 3. During the test, the unqualified modules are re
- VI. Use and operation
- VII. General failure and repair
- VIII. Notes
- 1. After the signal passes through the wall, the s
- 2. When installing the product, keep it away from
- 3. Install in a low-interference environment and f
JTY-GM-TC5401W 无线点型光电感烟火灾探测器安装使用说明书 Ver1.0 202010
辽宁•营口天成消防设备有限公司
2
II. Features
1. Adopting 470MHz wireless communication technology, no need to pre-buried wiring, easy and quick
engineering installation;
2. With battery low-voltage detection function, it can reflect the battery power status in time;
3. Use microprocessor to realize signal processing, and use digital signal to communicate with controller,
work stably and reliably, and have good suppression ability against electromagnetic interference.
III. Technical specifications
1. Battery type： CR17450（wired）
2. Rated working voltage：3.0V
3. Working Current： Standby Current≤14uA Alarm Current≤10mA
4. Indicators：Input light: red, always on when there is an input signal
Output light: red, always on when output action
Fault Indicator: yellow, flashing when the module is faulty
Working Indicator: Green, flashing when communication is normal
Note: When all the lights in this manual are flashing, the lights will turn on once every 200ms
5. Coding Method: The controller is automatically assigned during networking
6. Communication method: 470MHz FSK coded two-way communication
7. Communication distance：≤50m
8. Transmitted power：<20dBm