USER MANUAL EOS play Bluetooth-Speaker tianhootech.
IMPORTANT SAFETY INSTRUCTIONS • Read these instructions – All the safety and operating instructions should be read before this product is operated. • Keep these instructions – The safety and operating instructions should be retained for future reference. • Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. • Follow all instructions – All operating and use instructions should be followed.
INSTALLATION • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. CONNECTION • Connect the active loudspeaker according to the instructions in the manual. • Connect the active loudspeaker only to the correct mains voltage as shown on the equipment.
COMPLIANCE MARKS Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
BOX CONTENS 1. EOS play CONFERENCE SPEAKER 2. POWER ADAPTER 3. MICRO USB CABLE 4. USER MANUAL AND WARRANTY CARD 1. 2. 4. 3. 04.
GENERAL DESCRIPTION 1.UPPER COVER 2.MICRO USB 3.USB-C 4.LIGHTNING 5.KEY PAD 6.INDICATORS LIGHT 7.MICROPHONE 8.LOUDSPEAKER 9.MICRO USB PORT 05.
KEYPAD OVERVIEW 1 2 3 4 5 1. Short Press : Play / Aanswer. 2. Short Press : Volume Down. Hold Down 3 Seconts : Previous Song. 3 Short Press : Microphone off. 4. Short Press : Volume Up. Hold Down 3 Seconts : Next Song. 5. Short Press : Hang Up. Hold Down 3 Seconts : Disconnect and re-pair 06.
PLUGGING IN THE EOS play IMPORTANT: Before proceeding to point 1 below, check the included power cord and plug and your EOSplay Bluetooth speaker are compatible with your mains electricity supply and associated wall socket. 1. Insert the micro usb cable into the micro usb port on the back of the speaker. 2. Insert the micro usb cable into the usb port on the POWER ADAPTER 3. Connect the POWER ADAPTER to the wall socket. 1 2 3 07.
INDICATORS LIGHT BLUE LIGHT ON : Bluetooth connection ; Microphone on. BLUE - GREEN FLASHING : Bluetooth is connecting. GREEN LIGHT FLASHING : Incoming call. GREEN LIGHT ON : Calling. RED LIGHT ON : Microphone off. RED LIGHT FLASHING : Pairing. CONNECTING VIA BLUETOOTH (PAIRING) Follow these steps to pair the EOSplay wirelessly to your bluetooth device. 1. Ensure that the EOSplay is powered on. 2. The RED indicator starts to flash. 3. Enable bluetooth functionality on your device.
BLUETOOTH AUTO CONNECTION If a bluetooth connected device is moved outside the range of the stanmore bluetooth (approximately 10 metres without obstacles), it is disconnected. The device is automatically connected again when it is moved back within range. Every time the speaker starts up, it will tries to connect to the last connected bluetooth device. CHARGE YOUR SMARTPHONE. Note: Only the original 5V 2A power adapter can be used. Do not use non-original power adapters. 1.
1. 2. 3. 4. 10.
COMPATIBILITY 1. Only compatible with smartphones with I/O ports in the bottom middle. 2. Only compatible with mobile phones whose width does not exceed 78.1mm (3.07inch). 3. Compatible device : . All iphone after iphone5. . Samsung Galaxy S series. . Samsung Galaxy Note series. . Google Pixel seris. ... . And all I/O ports are in the middle of the bottom, and the width does not exceed 87.1mm(3.07inch) for mobile phones. 4. Suitable for most common thickness Case. 11.
TECHNICAL INFORMATION SOUND SPECIFICATION • DIGITAL CLASS D AMPLIFIER: 1X3.9W • MAX POWER OUTPUT: 5W RMS • 1.6” lOUDSPEAKER: 1X • 5W Output • FREQUENCY RESPONSE: 45 - 16 000Hz +-3db CONNECTIVITY: • BLUETOOTH: STANDARD V5.0 + SBC CODEC TECHNICAL INFORMATION • MAINS INPUT VOLTAGE: 100-240V~ /200W • NOMINAL RATING: 100-240V~ • ABSOLUTE MIN/MAX: 100-240V~ • MAINS FREQUENCY: 50-60Hz • POWER ADAPTER OUTPUT VOLTAGE: 5V 2000mA • MAX PEAK POWER CONSUMPTION: 66W • WEIGHT: 202g • SIZE: 120 X 90 X 68mm 12.
TROUBLE SHOOTING PROBLEM CAUSE BLUETOOTH DOES NOT TURN ON. The speaker is not connected to AC mains. Ensure that the EOS play is plugged into a working AC wall socke THERE IS NO SOUND Sound source not connected via Bluetooth. Connect the sound source to the speaker. see 08 or 09. Volume is set too low on either the sound source. Slightly increase the volume on your sound source. Volume is set too high on the sound source. Turn down the playback volume on the sound source.
TROUBLE SHOOTING PROBLEM CAUSE ACTION CANNOT CONNECT OR PAIR WITH A BLUETOOTH DEVICE The two Bluetooth devices are too far apart. Move the devices closer so that they are within10 metres, and unobstructed by obstacles such as walls or doors. Bluetooth is not enabled on your device. Ensure that Bluetooth is enabled on your device. The Bluetooth auto Connection timed out. the EOS play auto searches for devices for 3 minutes. If it times out, you need to manually connect to the device. 14.
TROUBLE SHOOTING PROBLEM CAUSE ACTION BLUETOOTH CONNECTION DROPS OUT The two Bluetooth devices are too far apart or the connection is affected due to obstacles. Move the devices closer so that they are within10 metres, and unobstructed by obstacles such as walls or doors. There is a strong electric field surrounding the EOS play Items such as microwave ovens, wireless network adapters, fluorescent lights and gas cookers use the same frequency range as the Bluetooth device.
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
