Data Sheet

1/4/2019 tibbo.com/datasheets/tibbits/06.html

http://tibbo.com/datasheets/tibbits/06.html 1/2

Tibbit Module

#06

M2T

Two high-power relays

Two mechanical high-power relays with normally opened and normally closed terminals.

IO 1

IO 2

IO 3

IO 4

IO 5

IO 6

IO 7

IO 8

LINE A

LINE B

LINE C

LINE D

LINE E

LINE F

LINE G

LINE H

CPU

RELAY 1

LOW=ON

RELAY 2

LOW=ON

Form:M2T

Power:

5V - Consumes 140mA

PAGE 1
/4/2019 tibbo.com/datasheets/tibbits/06.html Tibbit Module #06 Two high-power relays M2T Two mechanical high-power relays with normally opened and normally closed terminals. 1 24 5V IO 1 2 IO 2 3 IO 3 4 21 LINE C IO 4 5 20 LINE D 6 19 RELAY 1 LOW=ON 23 LINE A 22 LINE B CPU 7 IO 5 8 IO 6 9 18 RELAY 2 LOW=ON 17 LINE E 16 LINE F IO 7 10 15 LINE G IO 8 11 14 LINE H 12 13 Form: M2T Power: 5V - Consumes 140mA http://tibbo.com/datasheets/tibbits/06.
PAGE 2
1/4/2019 tibbo.com/datasheets/tibbits/06.html Mates with: #19, #20, #21 Details These relays have the contact capacity rated at 16A/48V (resistive load). To activate a relay, set the corresponding control line LOW. When left unconnected, control lines default to HIGH (and, hence, relays are o ). Combine this Tibbit with Tibbit #20 (nine terminal blocks). LEDs There are two red LEDs which are connected to two relay control lines. LEDs light up for the LOW state of control lines (i.e.