Operating Guide
3
Prior to Installation:
• Make sure you have all the necessary parts and tools.
• Compatible with ½” NPT cold water supply line.
• Requires 1 ¼” diameter wall hole opening.
• Installation onto a 2x4 backing is recommended.
• Asegúrese de tener todas las piezas y herramientas necesarias.
• Compatible con la línea de suministro de agua fría de 1/2 “NPT.
• Requiere abertura de 1 1/4 “de diámetro en el oricio de la pared.
• Se recomienda la instalación en un soporte de 2x4.
Tools You Will Need:
Adjustable Wrench Power DrillStrap Wrench #2 Phillips Screwdriver
Hammer Plumber’s TapeBucket Pencil or Marker