User Guide

4
B. If you use a FTDI cable, it does not need to be installed with a driver. You can
just plug in and use directly.
You can search B08CB5KT5M on Amazon to purchase a FTDI cable if you do not
have one.
Product link:
https://www.amazon.com/TIDRADIO-Programming-BaoFeng-Retevis-Radioddi
ty/dp/B08CB5KT5M/ref=sr_1_1?dchild=1&keywords=B08CB5KT5M&qid=16279
73909&sr=8-1
1) If your computer did not automatically install the driver, you will need to
update the driver to the latest driver
Download the latest FTDI driver at :https://ftdichip.com/drivers/vcp-drivers/
2.3. Software Download & Install
1) Turn on the computer, check if your computer system meets the
requirements.
2) Download the manufacture software on walkietalkiesoftware.com or CHIRP
software on https://chirp.danplanet.com/
3) Install the programming software
2.4. Connect your Walkie Talkie with Computer
1) USB programming cable connects with the computer end.
2) Connect the other end of the cable with your walkie talkie.
3) When both ends have been connected, turn on your radio. Make sure it has
enough power during the programming procedure.