User Guide
11
6)
Click "General Settings" , a page of "General Settings" will pop up, you can
adjust the limited parameters (Time Out[s], VOX Level, Work Mode, Battery Save
Mode, Squelch Level, Backlight[s], DTMF Side Tone, Scan Type, etc.).
Basic Setting
Name
Settings
Description
Boot Screen
LOGO/Msg/Voltage
Contents displayed at boot
Time Out[s]
Off/15-600(s)
This feature provides a limits transm
ission time to a programmed value.
This will promote battery conservati
on by not allowing you to make ex
cessively long-timetransmissions and
in the event of a stuck PTT switch,
it can prevent interference to other
users as well as battery depletion.
Squelch Level
0-9
Mutes the speaker of the transceiver in
the absence of a strong signal. Squelch
is either 0 or 1-9 levels. The higher
level, the stronger the signal must be
to in-mute the speaker.
Voice Alert
ON/OFF
Function voice prompt
Auto Key Lock
When this feature is activated, the
keypad will be automatically locked
after 15s; this prevents accidental
pressure of any keys.
Alarm Mode
On Site/Send sound/Send code
Site:Sounds alarm through your radio
speaker only.