User Guide

9
PTT-ID
When to send the
PTT-ID
OFF does not send
code;
BOT press PTT button to
send code;
EOT release PTT
button to send code;
BOTH press and
release PTT button to
send code
Codes are sent during either the
beginning or end of a transmission.
BusyLock
Busy Channel Lockout
YES/NO
YES: If the channel is occupied,
when you press the [PTT] key on
this channel, the radio will make a
beep tone and will not transmit any
signal.
NO: No matter if the channel is
occupied, the radio will transmit
the signal when you press the [PTT]
key.
Scan add
YES/NO
In the scan mode, whether add the
channel to the scan list.
YES: the channel is added to scan
list;
NO: the channel cannot be
scanned.
Signal
Signal code
1-15
Selects 1 of 15 DTMF codes. The
DTMF codes are programmed with
software and are up to 5 digits
each
Freq
Hopping
Code
OFF/ON
With this function, you can activate
the frequency hopping system,
improve the anti-interference
ability of the radio, and reduce the
risk of being monitored.